Publikationen von Prof. Dr.-Ing. Anja Pfennig

Challenges and possibilities of the manual metallographic serial sectioning process using the example of a quantitative microstructural analysis of graphite in cast iron
Lemiasheuski, A. et al. In: Practical Metallography 61, 9-10. (2024), S. 746-768.

Artikel › Journalartikel › 2024
First Approach in Analysis of Tool Wear When Milling Additive Manufacturing (AM) Parts
Sommer, Konstantin et al. In: Applied Sciences 14, 14. (2024), S. 1-10.

Artikel › Journalartikel › 2024
Impact of Reflection on Individual and Team Performance in Student Team Projects
Pfennig, Anja; Siegeris, Juliane. In: 10th International Conference on Higher Education Advances (HEAd’24). Valencia, 18-21 June 2024. Valencia: 2024, S. 407-414.

Konferenzbeitrag › Konferenzpaper › 2024
Influence of hydrogen on the failure mechanism of standard duplex stainless steel X2CrNiMoN22-5-3 exposed to corrosion fatigue
Wolf, Marcus; Pfennig, Anja. In: Key Engineering Materials 982, July 2024. (2024), S. 27-32.

Artikel › Journalartikel › 2024
Introduction of the Experimental Setup for the Investigation of the Novel Selective Melt Dispersion (SMD): A Directed Energy Deposition (DED) Process
Noller, Sebastian F. et al. In: Clean Technologies 6, 2. (2024), S. 572-585.

Artikel › Journalartikel › 2024
PEER-TO-PEER LEHRFILME IN DER STUDIENEINGANGSPHASE – Herausfordernde Rahmenbedingungen - Praxiserfahrungen
Pfennig, Anja. In: Herausforderungen zeitgemäßer Technikbildung im akademischen und berufsbildenden Sektor – Wege zu technischer Bildung. Siegen: 2024, S. 306-312.

Konferenzbeitrag › Konferenzpaper › 2024
The challenge of unprepared students in inverted classroom teaching scenarios
Pfennig, Anja. In: 10th International Conference on Higher Education Advances (HEAd’24). Valencia, 18-21 June 2024. Valencia: 2024, S. 1007-1015.

Konferenzbeitrag › Konferenzpaper › 2024
The Insignificant Improvement of Corrosion and Corrosion Fatigue Behavior in Geothermal Environment Applying Boehmit Coatings on High Alloyed Steels
Pfennig, Anja et al. In: Applied Sciences 2024, 14. (2024), S. 1-12 (1575).

Artikel › Journalartikel › 2024
Understanding the Anomalous Corrosion Behaviour of 17% Chromium Martensitic Stainless Steel in Laboratory CCS-Environment—A Descriptive Approach
Pfennig, Anja; Kranzmann, Axel. In: CO2 Capture and Sequestration 2024. (2024), S. 47-65.

Artikel › Sonderbandbeitrag › 2024
Corrosion Fatigue of Standard Duplex Stainless Steel X2CrNiMoN22-5-3 under Rotation Bending Load in Northern German Basin Environment
Wolf, Marcus; Pfennig, Anja. In: Solid State Phenomena 349, 9. (2023), S. 71-76.

Artikel › Journalartikel › 2023
Design and manufacturing of a LIGHTBOARD - Combining the peer-to-peer idea with project based teaching
Pfennig, Anja. In: Proceedings of the HEAd’23, Valencia Spain 2023. 2023, S. 929-936.

Konferenzbeitrag › Konferenzpaper › 2023
Developing a Flexible Materials Testing Course Concept for Future Engineers
Pfennig, Anja. In: Book of Proceedings for the 51st Annual Conference of the European Society for Engineering Education (SEFI). Belgien: 2023, S. 2719-2727.

Konferenzbeitrag › Konferenzpaper › 2023
Development of an automated 3D metallography system and some first application examples in microstructural analysis
Lemiasheuski, A. et al. In: Practical Metallography 60, 10. (2023), S. 676-691.

Artikel › Journalartikel › 2023
EMPOWERING STUDENT PROJECTS: FOSTERING REFLECTIVE PRACTICES FOR ENHANCED TEAMWORK AND INDIVIDUAL LEARNING
Siegeris, Juliane; Pfennig, Anja. In: ICERI2023 Proceedings. Valencia, Spain: 2023, S. 410-415.

Konferenzbeitrag › Konferenzpaper › 2023
Getting started – hands-on producing lecture films
Pfennig, Anja. In: Book of Proceedings for the 51st Annual Conference of the European Society for Engineering Education (SEFI). Belgien: 2023, S. 3231-3236.

Konferenzbeitrag › Konferenzpaper › 2023
Inverting the classroom using on-demand lightboard micro lecture films (learning glass)
Pfennig, Anja. In: Proceedings of the HEAd’23, Valencia Spain 2023. 2023, S. 1155-1162.

Konferenzbeitrag › Konferenzpaper › 2023
Low Threshold Introduction to the Inverted Classroom Teaching Method
Pfennig, Anja. In: Proceedings of the 6th International Conference on Education and E-Learning ICEEL 2022. New York, NY, USA: 2023, S. 1-13.

Konferenzbeitrag › Konferenzpaper › 2023
Reduction in Ground Times in Passenger Air Transport: A First Approach to Evaluate Mechanisms and Challenges
Hutter, Florina Gesine; Pfennig, Anja. In: Applied Sciences, Special Issue Air Traffic and Applications of Aerodynamics 2023 13, 3. (2023), S. 1380.

Artikel › Journalartikel › 2023
Visualisierung und Portfolio-Bewertung – Ein Schlüssel zu selbstgesteuertem Lernen in der Studieneingangsphase
Pfennig, Anja. In: Technische Bildung für eine nachhaltige Entwicklung – Wege zur technischen Bildung. Referate der 16. Ingenieurspädagogischen Regionaltagung 2022 an der Universität Dortmund vom 12.-14. Mai 2022. Siegen: 2023, S. 69-76.

Konferenzbeitrag › Konferenzpaper › 2023
"Welt der Dinge / Mechanik in der Fahrzeugtechnik - Konstruktion und Funktion" MaWeG 15 Werkstoffe und Maschinenbau in der Grundschule
Pfennig, Anja. Hg. von HTW Berlin, Mühlenau Grundschule Berlin. Berlin: 2023, S. 1-25.
Forschungs- / Abschlussbericht › 2023
"Welt der Dinge / Technische Mechanik, Strömung und Thermodynamik" MaWeG 14 Werkstoffe und Maschinenbau in der Grundschule
Pfennig, Anja. Hg. von HTW Berlin, Mühlenau Grundschule Berlin. Berlin: 2023, S. 1-17.
Forschungs- / Abschlussbericht › 2023
Describing the peculiar corrosion behavior of X35CrMo17 and X5CrNiCuNb16-4 stainless steel in laboratory CCS-environment
Pfennig, Anja; Kranzmann, Axel. In: Proceedings of the 16th international Conference on Greenhouse Gas Control Technologies . o. O.: 2022, S. 1-8.

Konferenzbeitrag › Konferenzpaper › 2022
Dimensioning of the Clearance as a Means of Avoiding Burr and Film Formation during the Punch-ing of PC/ABS Cable Ducts
Noller, Sebastian Friedrich et al. In: Clean Technologies 4, 4. (2022), S. 1290-1299.

Artikel › Journalartikel › 2022
First Approach to Analyze the Characteristics of Additively Manufactured Components
Schulze, Philip et al. In: Proceedings of the 4tth Global Conference and Expo on Materials Science and Engineering. Switzerland: 2022, S. 1 - 5.

Konferenzbeitrag › Konferenzpaper › 2022
Flipped classroom - a solution to teach the unloved iron carbon phase diagram in first year engineering during the Covid-19 pandemic
Pfennig, Anja. In: Proceedings of the HEAd’22. 2022, S. 413-420.

Konferenzbeitrag › Konferenzpaper › 2022
Flipped Classroom in Materialwissenschaften - der didaktische Mehrwert? Praxiserfahrungen
Pfennig, Anja. In: Produktions- und Dienstleisungsstrukturen der Zukunft im Fokus – Wege zur technischen Bildung. Referate der 15. Ingenieurspädagogischen Regionaltagung 2021 an der Hochschule Zittau/Görlitz vom 17.-19. Juni 2021. Siegen: 2022, S. 47-54.

Konferenzbeitrag › Konferenzpaper › 2022
MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule
Pfennig, Anja. Hg. von interne Verwendung. intern: 2022, S. 1-18.
Forschungs- / Abschlussbericht › 2022
Reduction of Life Time Expectation of Standard Duplex Stainless Steel Exposed to Hydrogen under Corrosion Fatigue Conditions
Pfennig, Anja; Wolf, Marcus. In: Key Engineering Materials KEM 929. (2022), S. 35-40.

Artikel › Journalartikel › 2022
Strategies for improving online student learning in undergraduate material science
Pfennig, Anja. In: Proceedings of the 2022 World Engineering Education Forum and The Global Engineering Deans Council (WEEF&GEDC). New York, NY, USA: 2022, S. 1-5.

Konferenzbeitrag › Konferenzpaper › 2022
Successfully Inverting the Classroom - Recommendations to Teach (fully online). Practical marginal conditions to succeed lecturing science implementing the inverted classroom method.
Pfennig, Anja. In: ICEMT 2022 Proceedings. New York, NY, USA: 2022, S. 324-330.

Konferenzbeitrag › Konferenzpaper › 2022
Team Formation and Project Assignment −the dilemma of assigning students to project groups
Siegeris, Juliane; Pfennig, Anja. In: Proceedings of the HEAd’22. 2022, S. 1313-1320.

Konferenzbeitrag › Konferenzpaper › 2022
The negligible impact of lecture videos on the learning progress in a laboratory course during the Covid-19 pandemic
Pfennig, Anja. In: International Journal of e-Education, e-Business, e-Management and e-Learning, IJEEEE 12. 2022, 3. (2022), S. 79-88.

Artikel › Journalartikel › 2022
Understanding the Anomalous Corrosion Behaviour of 17% Chromium Martensitic Stainless Steel in Laboratory CCS-Environment—A Descriptive Approach
Pfennig, Anja; Kranzmann, Axel. In: Clean Technologies 4, 2. (2022), S. 239-257.

Artikel › Journalartikel › 2022
10 practical leads for effective implementation of lecture videos in an introductory course. Practical marginal conditions to succeed lecturing science supported by lecture videos
Pfennig, Anja. In: ICEMT 2021: 5th International Conference on Education and Multimedia Technology, Kyoto, Japan, July 23-25, 2021. New York, NY: 2021, S. 246-253.

Konferenzbeitrag › Konferenzpaper › 2021
Corrosion and Corrosion Fatigue of Steels in Downhole CCS Environment - A Summary
Pfennig, Anja et al. In: Processes 9 (4). (2021), S. 594-627.

Artikel › Journalartikel › 2021
Describing the Alignment of Course Assessment with the Blended-Learning Teaching Approach for a First Year Material Science Course
Pfennig, Anja. In: Modern Perspectives in Language, Literature and Education Vol. 8, 10 August 2021. Great Britain, India: 2021, S. 9-14.

Sammelbandbeitrag › Aufsatz › 2021
Design of Experiments Screening Design Used to Optimize the Punching Process of Cable Ducts Made of Polymer Blend PC/ABS: A Recent Study
Noller, Sebastian et al. In: New Approaches in Engineering Research. Great Britain, India: 2021, S. 1-10.

Sammelbandbeitrag › Aufsatz › 2021
Effects of saline aquifer water on the corrosion behaviour of martensitic stainless steels during exposure to CO2 environment
Pfennig, Anja; Kranzmann, Axel. In: Proceedings of the 15th international Conference on Greenhouse Gas Control Technologies. o. O.: 2021, S. 1-12.

Konferenzbeitrag › Konferenzpaper › 2021
Evaluating corrosion and corrosion fatigue behavior via laboratory testing techniques in highly corrosive CCS-environment
Pfennig, Anja et al. GHGT 15 - 15th Green House Gas Control Technologies Conference. 2021.

Konferenzbeitrag › Poster › 2021
Failure of Standard Duplex Stainless Steel X2CrNiMoN22-5-3 under Corrosion Fatigue in Geo-thermal Environment: A Recent Study
Wolf, Marcus; Pfennig, Anja. In: Recent Trends in Chemical and Material Sciences Vol. 4. London/Great Britain and West Bengal/India: 2021, S. 62-68.

Sammelbandbeitrag › Aufsatz › 2021
How flipped classroom teaching methods in first year studying succeed
Pfennig, Anja. In: Proceedings of the 7th International Conference on Higher Education Advances (HEAd’21). Valencia, Spain: 2021, S. 1211-1218.

Konferenzbeitrag › Konferenzpaper › 2021
Improving Learning Outcome for GSL (German as a Second Language) Students in a Blended Learning Cumulative Assessment Material Science Course
Pfennig, Anja. In: IJEEEE - International Journal of e-Education, e-Business, e-Management and e-Learning Vol. 11, 3. (2021), S. 93-100.

Artikel › Journalartikel › 2021
Influence of Geothermal Environment on the Corrosion Fatigue Behaviour of Standard Duplex Stainless Steel X2CrNiMoN22-5-3
Wolf, Marcus; Pfennig, Anja. In: New Approaches in Engineering Research Vol. 2, 3 July 2021. Great Britain, India: 2021, S. 146-156.

Sammelbandbeitrag › Aufsatz › 2021
Investigating the Adjustment of Punching Process of Poly Vinyl Chloride (PVC) and Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) Cable Ducts using High-speed Video Recordings
Noller, Sebastian et al. In: New Approaches in Engineering Research. Great Britain, India: 2021, S. 11-20.

Sammelbandbeitrag › Aufsatz › 2021
Kunststoffe stanzen ohne Grat- und Flusenbildung
Noller, Sebastian F. et al. In: VDI - Z Integrierte Produktion Vol. 163, Issue 3. (2021), S. 51-54.

Artikel › Journalartikel › 2021
Meeting diversity during the covid-19 pandemic in a fully online learning environment
Pfennig, Anja. In: Proceedings of the 7th International Conference on Higher Education Advances (HEAd’21). Valencia, Spain: 2021, S. 735-742.

Konferenzbeitrag › Konferenzpaper › 2021
Statistische Versuchsplanung: Stanzen von Kunststoffelementen ohne Grat- und Flusenbildung
Noller, Sebastian et al. In: VDI-Z Qualitätssicherung 02.02.2021. (2021), S. 51-54.

Artikel › Journalartikel › 2021
Study on the Catching Students in an Inverted Classroom Environment
Pfennig, Anja. In: Modern Perspectives in Language, Literature and Education Vol. 8, 10 August 2021. Great Britain, India: 2021, S. 21-28.

Sammelbandbeitrag › Aufsatz › 2021
Vom Blended Learning zum Full Online – so einfach geht es nicht – Praxiserfahrungen zum Einsatz von Lehrfilmen
Pfennig, Anja. In: Lecture Notes in Informatics, DELFI 2021 Die 19. Fachtatung Bildungstechnologien der Gesellschaft für Informatik e.V.. Bonn: 2021, S. 289-294.

Konferenzbeitrag › Konferenzpaper › 2021
Adjusting the Punching Process of Poly Vinyl Chloride (PVC) and Polycarbonate/ Acrylonitrile Butadiene Styrene (PC/ABS) Cable Ducts Using High-Speed Video Recordings
Noller, Sebastian F. et al. In: International Journal of Mechanical Engineering and Robotics Research IJMERR Vol. 9, No. 10, October 2020. (2020), S. 1353-1359.

Artikel › Journalartikel › 2020
Das Werkstofftechnik-Portfolio– ein neues Blended-Learning Kurskonzept für die Studieneingangsphase
Pfennig, Anja. In: So gelingt E-Learning. Reader zum Higher Education Summit 2019. München: 2020, S. 138-145.

Sammelbandbeitrag › Aufsatz › 2020
Design of Experiments screening design used to optimize the punching process of cable ducts made of polymer blend PC/ABS
Pfennig, Anja et al. In: 12th International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2020) Vol. 9 No. 9, September 2020. (2020), S. 1226-1232.

Artikel › Journalartikel › 2020
Failure of Standard Duplex Stainless Steel X2CrNiMoN22-5-3 under Corrosion Fatigue in Geothermal Environment (paper 012015)
Wolf, Marcus; Pfennig, Anja. In: IOP Conference Series: Materials Science and Engineering, Volume 894, 2020 the 3rd International Conference on Materials Engineering and Applications (ICMEA 2020). online open access: 2020, S. 93-98.

Konferenzbeitrag › Konferenzpaper › 2020
Glatte Schnittflächen sind das Ziel: Stanzprozesse werden optimiert
Heiler, Roland et al.

Webseiten / Blog / Forum › 2020
High-speed tensile testing of extruded PC based polymers for cable ducts
Noller, Sebastian et al. In: Journal of Physics: Conference Series, Vol. 1425, Modelling and Methods of Structural Analysis 13–15 November 2019, Moscow, Russian Federation. online open access: 2020, S. 012195 (1-8).

Konferenzbeitrag › Konferenzpaper › 2020
Influence of geothermal environment on the corrosion fatigue behaviour of standard duplex stainless steel X2CrNiMoN22-5-3
Wolf, Marcus; Pfennig, Anja. In: Journal of Physics: Conference Series, Vol. 1425, Modelling and Methods of Structural Analysis 13–15 November 2019, Moscow, Russian Federation. online open access: 2020, S. 012183 (1-9).

Konferenzbeitrag › Konferenzpaper › 2020
Lessons learnt –The role of peer-to-peer lecture films in a first year material science laboratory course
Pfennig, Anja. In: 6th International Conference on Higher Education Advances (HEAd’20). Valencia, Spain: 2020, S. 9-16.

Konferenzbeitrag › Konferenzpaper › 2020
Low-threshold production of peer-to-peer lecture films
Pfennig, Anja; Maier-Rothe, Jörg. In: ICEEL 2019: Proceedings of the 2019 3rd International Conference on Education and E-Learning 10, 3. (2020), S. 214-221.

Artikel › Journalartikel › 2020
Matching course assessment of a first year material science course to the blended-learning teaching approach
Pfennig, Anja. In: 2018 2nd International Conference on Education and E-Learning November 05-07, 2018/Bali, Indonesia ICEEL 2018 Vol 10(1). (2020), S. 53-59.

Artikel › Journalartikel › 2020
Neue Erkenntnisse beim Stanzen von PVC und PC-ABS
Lechler, Katrin et al. In: Kunststoff + Verarbeitung Ausgabe 5 2020. (2020), S. 120-122.

Artikel › Journalartikel › 2020
Process Development: Burr and Film Formation during High Speed Punching of Extruded PC Based Polymers
Noller, Sebastian et al. In: Materials Science Forum, Advanced Materials and Processing Technologies II. Baech, Switzerland: 2020, S. 135-142.

Konferenzbeitrag › Konferenzpaper › 2020
The role of peer-to-peer lecture films in inverted classroom teaching scenarios
Pfennig, Anja. In: International Journal of e-Education, e-Business, e-Management and e-Learning IJEEEE 2020 10, 3. (2020), S. 229-234.

Artikel › Journalartikel › 2020
Corrosion and Fatigue of Heat Treated Martensitic Stainless Steel 1.4542 used for Geothermal Applications
Pfennig, Anja; Kranzmann, Axel. In: MATTER: International Journal of Science and Technology Vol 5 No 1 (2019): Regular Issue. (2019), S. 138-158.

Artikel › Journalartikel › 2019
Corrosion Fatigue of Duplex Stainless Steel X2CrNiMoN22-5-3 exposed to the Geothermal Environment of the Northern German Basin under Different Applied Potentials and Surface Finishes
Wolf, Marcus et al. In: 14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14), SSRN Electronic Journal. o.O.: 2019, S. 1-8.

Konferenzbeitrag › Konferenzpaper › 2019
Crossing borders – the challenge of teaching a first year blended learning material science course in a mainly German as a Second Language GSL environment
Pfennig, Anja. In: Grenzen in Zeiten technologischer und sozialer Disruption. Berlin: 2019, S. 244-249.

Sammelbandbeitrag › Aufsatz › 2019
Degradation of AISI 630 exposed to CO2-saturated saline aquifer at ambient pressure and 100 bar
Pfennig, Anja; Kranzmann, Axel. In: Journal of Applied Sciences Research 6, 3. (2019), S. 11-17.

Artikel › Journalartikel › 2019
Effect of CO2, atmosphere and pressure on the stability of X35CrMo17 stainless steel in laboratory CCS-environment
Pfennig, Anja; Kranzmann, Axel. In: 14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14), SSRN Electronic Journal. o.O.: 2019, S. 1-8.

Konferenzbeitrag › Konferenzpaper › 2019
Influence of surface quality on the corrosion and corrosion fatigue behavior of high alloyed steels exposed to different saline aquifer water environments
Pfennig, Anja et al. In: MATTER: International Journal of Science and Technology Vol 5 No 1 (2019): Regular Issue. (2019), S. 115-137.

Artikel › Journalartikel › 2019
Lehrfilme einfach einfach machen – erfolgreiche Konzeptionierung von peer-to-peer Lehrfilmen
Pfennig, Anja; Maier-Rothe, Jörg. In: P297 - DELFI 2019 - Die 17. Fachtagung Bildungstechnologien. Bonn: 2019, S. 277-282.

Konferenzbeitrag › Konferenzpaper › 2019
“Making it work” – Practice Examples of Preparation and Embedding Peer-to-Peer Lecture Films in Successful Inverted Classroom Scenarios
Pfennig, Anja. In: PEOPLE: International Journal of Social Sciences Vol 5 No 1 (2019): Regular Issue. (2019), S. 640-655.

Artikel › Journalartikel › 2019
“Making of” – Successfully Planning and Implementing peer-to-peer Lecture Films
Pfennig, Anja; Maier-Rothe, Jörg. In: PEOPLE: International Journal of Social Sciences Vol 5 No 1 (2019): Regular Issue. (2019), S. 795-815.

Artikel › Journalartikel › 2019
Oxidation behavior of FeCr model alloys in synthetic air at temperatures above 600 °C
Simkin, Roman et al. Gordon Research Conference, 20. Aqueous Corrosion Mechanisms, Tools, Agents and Avoidance of Corrosion . 2019.

Konferenzbeitrag › Poster › 2019
Oxidation of FeCr model alloys in synthetic air at temperatures above 600 °C
Simkin, Roman et al. EUROCORR 2019 The European Corrosion Congress. 2019.

Konferenzbeitrag › Poster › 2019
Process development for punching extruded PC based materials in cable duct production
Noller, Sebastian Friedrich et al. In: XXII International Scientific Conference “Construction the Formation of Living Environment” (FORM-2019), E3S Web Conf.. Tashkent, Usbekistan: 2019, S. 06015 (1-10).

Konferenzbeitrag › Konferenzpaper › 2019
Process development: Ridge and film formation during high speed stamping of extruded PC-ABS polymer blend
Sebastian Noller, et al. In: Journal of material science and engineering 8, 1. (2019), S. 34-35.

Artikel › Journalartikel › 2019
The role of surface texture on the corrosion behavior of high alloyed steel exposed to saline aquifer water environment
Pfennig, Anja et al. In: 14th Greenhouse Gas Control Technologies Conference Melbourne 21-26 October 2018 (GHGT-14), SSRN Electronic Journal. o.O.: 2019, S. 1-8.

Konferenzbeitrag › Konferenzpaper › 2019
The Role of Surface Texture on the Corrosion Fatigue Behavior of High Alloyed Stainless Steel Exposed to Saline Aquifer Water Environment
Pfennig, Anja; Kranzmann, Axel. In: IOP Conference Series: Materials Science and Engineering MSE 7, 2. (2019), S. 26-33.

Artikel › Journalartikel › 2019
"Welt der Dinge / Auftrieb und Korrosion", Forschungsbericht, Teil 11 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2019, S. 1-24.
Forschungs- / Abschlussbericht › 2019
"Welt der Dinge / Reibung und Verschleiß", Forschungsbericht, Teil 12 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2019, S. 1-17.
Forschungs- / Abschlussbericht › 2019
Construction of an adiabatic calorimeter for investigation of high temperature salt – based phase change material
Simkin, Roman et al. In: International Proceedings of Chemical, Biological and Environmental Engineering (IPCBEE). Singapore: 2018, S. 21-28.

Konferenzbeitrag › Konferenzpaper › 2018
Construction of an Adiabatic Calorimeter for Investigation of Salt-Based Phase Change Materials for Thermal Energy Storages
Simkin, Roman; Pfennig, Anja. In: Kreativität + X = Innovation. Berlin: 2018, S. 280-285.

Sammelbandbeitrag › Aufsatz › 2018
Flipping the classroom and turning the grades – a solution to teach phase diagrams to engineering students
Pfennig, Anja. In: JFLET Journal of Foreign Language Education and Technology 3, 1. (2018), S. 18-34.

Artikel › Journalartikel › 2018
Impact of saline aquifer water on local corrosion of martensitic stainless steels during exposure to CO2 environment (CCS)
Pfennig, Anja; Kranzmann, Axel. In: IJCEA International Journal of Chemical Engineering and Application 9, 1. (2018), S. 26-31.

Artikel › Journalartikel › 2018
Impact of saline aquifer water on surface and shallow pit corrosion of martensitic stainless steels during exposure to CO2 environment (CCS)
Pfennig, Anja; Kranzmann, Axel. In: International Conference on Future Environment and Energy ICFEE 2018. Bristol: 2018, S. 1-8.

Konferenzbeitrag › Konferenzpaper › 2018
Improvement of learning outcome in material science through inverted classroom tech-niques and alternative course assessment
Pfennig, Anja. In: JFLET Journal of Foreign Language Education and Technology 3, 1. (2018), S. 148-162.

Artikel › Journalartikel › 2018
In-situ experimental equipment to predict corrosion fatigue behavior of materials exposed to corrosive environment.
Pfennig, Anja; Wolf, Marcus. In: Journal of Applied Sciences Research 14, 1. (2018), S. 25-31.

Artikel › Journalartikel › 2018
In-situ testing of corrosion and corrosion fatigue behavior of stainless steels in geothermal environment
Pfennig, Anja et al. In: International Proceedings of Chemical, Biological and Environmental Engineering (IPCBEE). Hong Kong, China: 2018, S. 13-20.

Konferenzbeitrag › Konferenzpaper › 2018
Peer-to-peer lecture films in a first year laboratory material science course
Pfennig, Anja. In: International Journal of e-Education, e-Business, e-Management and e-Learning (IJEEEE) 8, 4. (2018), S. 234-239.

Artikel › Journalartikel › 2018
Peer-to-Peer Lecture Films in a First Year Laboratory Material Science Course
Pfennig, Anja. In: International Journal of e-Education, e-Business, e-Management and e-Learning IJEEEE 8, 4. (2018), S. 234.

Artikel › Journalartikel › 2018
Successfully planning and implementing peer-to-peer lecture films – “Making it work”
Pfennig, Anja. In: 4th International Proceedings of the Conference on Higher Education Advances (HEAd’18). Valencia, Spanien: 2018, S. 37-44.

Konferenzbeitrag › Konferenzpaper › 2018
Successfully planning and implementing peer-to-peer lecture films – “Making of”
Pfennig, Anja; Maier-Rothe, Jörg. In: Proceedings of the 4th International Conference on Higher Education Advances (HEAd’18). Valencia, Spanien: 2018, S. 45-54.

Konferenzbeitrag › Konferenzpaper › 2018
TEACHING ANALYTICS MEETS LEARNING ANALYTICS - AUSWAHL VON LEHRMETHODEN, DIE SINNVOLL MIT E-ASSESSMENT-TOOLS ZU BEWERTEN SIND
Pfennig, Anja et al. In: Hochschulforum Digitalisierung (2018). HFD Winter School E-Book. Hochschullehre im digitalen Zeitalter gestalten,. Essen: 2018, S. 31-34.

Sammelbandbeitrag › Aufsatz › 2018
"Welt der Dinge / Mechanik der Werkstoffe", Forschungsbericht, Teil 10 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2018, S. 1-26.
Forschungs- / Abschlussbericht › 2018
"Welt der Dinge / Strömung und Antriebe", Forschungsbericht, Teil 9 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2018, S. 1-28.
Forschungs- / Abschlussbericht › 2018
Borehole integrity of austenitized and annealed pipe steels suitable for carbon capture and storage (CCS)
Pfennig, Anja; Kranzmann, Axel. In: 2016 APCBEES Asia-Pacific Chemical, Biological & Environmental Engineering Society Vol. 5, Issue 3. (2017), S. 213-218.

Artikel › Journalartikel › 2017
Catching Students in an Inverted Classroom Environment
Pfennig, Anja. In: International Journal of e-Education, e-Business, e-Management and e-Learning (IJEEEE) Vol. 7, No. 2. (2017), S. 85-90.

Artikel › Journalartikel › 2017
Corrosion fatigue of 1.4542 exposed to a laboratory saline aquifer water CCS-environment
Pfennig, Anja et al. In: Energy Procedia. Greenhouse Gas Control Technologies (GHGT) Vol. 114, July 2017. (2017), S. 5219–5228.

Artikel › Journalartikel › 2017
Corrosion Fatigue of Duplex Stainless Steel 1.4462 (X2CrNiMoN22-5-3) exposed to Geothermal Environment at 100 °C simulating the Northern German Basin
Afanasiev, Roman et al. 2017.

Konferenzbeitrag › Poster › 2017
Flipping the classroom and turning the grades – a solution to teach unbeloved phase diagrams to engineering students
Pfennig, Anja. In: Proceedings of the HEAd’17. 3rd International Conference on Higher Education Advances. Valencia: 2017, S. 73-81.

Konferenzbeitrag › Konferenzpaper › 2017
Improvement of learning outcome in material science through inverted classroom techniques and alternative course assessment
Pfennig, Anja. In: Proceedings of the HEAd’17. 3rd International Conference on Higher Education Advances. Valencia: 2017, S. 82-90.

Konferenzbeitrag › Konferenzpaper › 2017
Investigation of Corrosion Fatigue of Duplex Steel X2CrNiMoN22 5 3 Exposed to a Geothermal Environment under Different Electrochemical Conditions and Load Types
Wolf, Marcus et al. In: Energy Procedia. Greenhouse Gas Control Technologies (GHGT) Vol. 114, July 2017. (2017), S. 5337-5345.

Artikel › Journalartikel › 2017
Potential of martensitic stainless steel X5CrNiCuNb 16-4 as pipe steel in corrosive CCS environment
Pfennig, Anja; Kranzmann, Axel. In: IJESD International Journal of Environmental Science and Development 2017, Vol. 8, No. 7. (2017), S. 466-473.

Artikel › Journalartikel › 2017
Sicherheit und Zuverlässigkeit von additiv gefertigten Implantaten
Wolf, Marcus; Pfennig, Anja. In: Industrie von morgen. Beiträge und Positionen 2017. Berlin: 2017, S. 188-193.

Sammelbandbeitrag › Aufsatz › 2017
Unusual corrosion behavior of 1.4542 exposed a laboratory saline aquifer water CCS-environment
Pfennig, Anja et al. In: Energy Procedia. Greenhouse Gas Control Technologies (GHGT) Vol. 114, July 2017. (2017), S. 5229-5240.

Artikel › Journalartikel › 2017
"Welt der Dinge / Raketenantriebe", Forschungsbericht, Teil 8 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2017, S. 1-38.
Forschungs- / Abschlussbericht › 2017
„Bionik", Abschlussbericht und Präsentation, Teil 7 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule Berlin. Berlin: 2016, S. 1-32.
Forschungs- / Abschlussbericht › 2016
Corrosion fatigue of duplex stainless steel X2CrNiMoN22-5-3 under geothermal conditions of Northern German Basin
Simkin, Roman et al. In: Construction – Formation of the Environment. Moskau: 2016, S. 1-4.

Konferenzbeitrag › Konferenzpaper › 2016
Corrosion Fatigue of X2CrNiMoN22-5-3 exposed to the Geothermal Environment of the North German Basin
Wolf, Marcus et al. In: NACE Corrosion 2016. Houston Texas: 2016, S. C2016-7378.

Konferenzbeitrag › Konferenzpaper › 2016
Corrosion Fatigue of X46Cr13 in CCS Environment
Pfennig, Anja et al. In: Energy Technology 2016: Carbon Dioxide Management and Other Technologies. Hoboken: 2016, S. 49-56.

Konferenzbeitrag › Konferenzpaper › 2016
Digitalisierung von Oberflächenstrukturen mittels 3D-Oberflächenmessung zur Untersuchung von Schädigungsmechanismen bei Ermüdungsversuchen
Wolf, Marcus et al. In: Digitalisierung: Menschen zählen. Berlin: 2016, S. 144-149.

Sammelbandbeitrag › Aufsatz › 2016
Inverting the Classroom in an Introductory Material Science Course
Pfennig, Anja. In: Procedia - Social and Behavioral Sciences Vol. 228, 20.07.2016. (2016), S. 32-38.

Artikel › Journalartikel › 2016
Investigation of Corrosion Fatigue of Duplex Steel X2CrNiMoN22-5-3 Exposed to the Geothermal Environment under Different Electrochemical Conditions
Wolf, Marcus et al. In: Supplemental Proceedings, Connecting the global minerals, metals, and materials community. Hoboken: 2016, S. 1-8.

Konferenzbeitrag › Konferenzpaper › 2016
Peer-to-peer Lecture Films – A Successful Study Concept for a First Year Laboratory Material Science Course
Pfennig, Anja; Hadwiger, Paul. In: Procedia - Social and Behavioral Sciences Vol. 228, 20.07.2016. (2016), S. 24-31.

Artikel › Journalartikel › 2016
Untersuchung des Einflusses vom kathodischen Schutz auf die Schwingfestigkeit des Duplexstahls X2CrNiMoN22-5-3
Wolf, Marcus et al. In: 17. Nachwuchswissenschaftlerkonferenz, 20. April 2016 - Hochschule Schmalkalden. Schmalkalden: 2016, S. 193-199.

Konferenzbeitrag › Konferenzpaper › 2016
Untersuchung von Duplexstählen unter schwingender und korrosiver Belastung bei Zug-/Druck und Umlaufbiegebeanspruchung
Wolf, Marcus et al. In: GfKorr Jahrestagung 2016 Duplex-Stähle – Nische oder Zukunft ?. Frankfurt am Main: 2016, S. 121-130.

Konferenzbeitrag › Konferenzpaper › 2016
A material science course based on a blended learning concept using an interdisciplinary approach at HTW Berlin
Pfennig, Anja; Böge, Astrid. In: Future Education and Training in computing: How to Support Learning at Anytime Anywhere" (ETN FETCH). Berlin: 2015, S. 1-1.

Konferenzbeitrag › Konferenzpaper › 2015
"Anomalien in der Technik", Abschlussbericht, Teil 4 des Projektes "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja et al. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2015, S. 1-15.
Forschungs- / Abschlussbericht › 2015
Einfluss der Wärmebehandlung auf die Korrosionsbeständigkeit von hochlegierten Chrom-haltigen Stählen unter CCS-Bedingungen
Pfennig, Anja; Kranzmann, Axel. In: Kraftwerkstechnik 2015: Strategien, Anlagentechnik und Betrieb. Freiberg: 2015, S. 1721-1742.

Konferenzbeitrag › Konferenzpaper › 2015
"Energie und Fortbewegung - Antriebe", Abschlussbericht, Teil 5 "MaWeG - Maschinenbau und Werkstoffkunde in der Grundschule"
Pfennig, Anja et al. Hg. von Hochschule für Technik und Wirtschaft (HTW) Berlin, Mühlenau-Grundschule, Berlin. Berlin: 2015, S. 1-45.
Forschungs- / Abschlussbericht › 2015
Evaluation of Heat Treatment Performance of Potential Pipe Steels in Ccs-Environment
Pfennig, Anja et al. In: Energy Technology 2015: Carbon Dioxide Management and Other Technologies. New York: 2015, S. 15-22.

Konferenzbeitrag › Konferenzpaper › 2015
Film im Kontext studiengangübergreifender online-Lehre
Pfennig, Anja; Hadwiger, Paul. In: 5. Qualitätsdialog Lehre – Studienerfolg verbessern – Ingenieurausbildung. Düsseldorf: 2015, S. 1-1.

Konferenzbeitrag › Abstract › 2015
High-Temperature-High Pressure Stress-Strain Testing of Materials in CO2-Containing Saline Solutions
Pfennig, Anja; Wolf, Marcus. In: TMS 2015 Suplemental Proceedings. Hoboken: 2015, S. 1015-1022.

Konferenzbeitrag › Konferenzpaper › 2015
Improving study skills by implementing peer to peer lecture films
Pfennig, Anja; Hadwiger, Paul. In: Future Education and Training in computing: How to Support Learning at Anytime Anywhere" (ETN FETCH). Berlin: 2015, S. 1-1.

Konferenzbeitrag › Konferenzpaper › 2015
Innovative Werkstoffprüfung infolge der Energiewende unter zeitlich dynamisch-mechanischer und korrosiver Belastung
Pfennig, Anja et al. In: Nachhaltige Mobilität, Energiewende und Industrie 4.0. Berlin: 2015, S. 118-124.

Sammelbandbeitrag › Aufsatz › 2015
Inverting the classroom teaching material science based on a blended learning concept – a challenge for first year students and lecturer
Pfennig, Anja. In: Future Education and Training in computing: How to Support Learning at Anytime Anywhere" (ETN FETCH). Berlin: 2015, S. 1-1.

Konferenzbeitrag › Konferenzpaper › 2015
Konstruktion von Prüfanlagen zur Untersuchung der Schwingungsrisskorrosion
Wolf, Marcus; Pfennig, Anja. In: Tagungsband 16. Nachwuchswissenschaftlerkonferenz (NWK 16). Berlin: 2015, S. 70-76.

Konferenzbeitrag › Konferenzpaper › 2015
Studienfachübergreifende Lehre im Fach Werkstofftechnik an der HTW-Berlin – ein Praxisbeispiel
Pfennig, Anja; Böge, Astrid. In: Proceedings of DeLFI Workshops 2015 co-located with 13th e-Learning Conference of the German Computer Society (DeLFI 2015). Aachen: 2015, S. 170-178.

Konferenzbeitrag › Konferenzpaper › 2015
The role of austenitizing routines of pipe steels during CCS
Pfennig, Anja et al. In: Energy Technology 2015: Carbon Dioxide Management and Other Technologies. New York: 2015, S. 131-138.

Konferenzbeitrag › Konferenzpaper › 2015
Comparison between X5CrNiCuNb16-4 and X46Cr13 under Corrosion Fatigue
Pfennig, Anja et al. In: Corrosion 2014 . Houston, TX, USA: 2014, S. 1-5 (Paper no. 3776).

Konferenzbeitrag › Konferenzpaper › 2014
Corrosion Behavior of Differently Heat Treated Steels in CCS Environment with Supercritical CO2
Pfennig, Anja et al. In: Energy Technology 2014: Carbon Dioxide Management and Other Technologies . Hoboken, New Jersey, USA: 2014, S. 225-232.

Konferenzbeitrag › Konferenzpaper › 2014
Corrosion behavior of steels for CO2 injection
Yevtushenko, Oleksandra et al. In: Process Safety and Environmental Protection , Volume 92, Issue 1. (2014), S. 108–118.

Artikel › Journalartikel › 2014
Design of a high pressure system for in-situ tests on the corrosion fatigue of metallic materials
Pfennig, Anja et al. In: Corrosion 2014. Houston, TX, USA: 2014, S. 1-7 (Paper no. 3775).

Konferenzbeitrag › Konferenzpaper › 2014
Effect of heat treatment of injection pipe steels on the reliability of a saline aquifer water CCS-site in the Northern German Basin
Pfennig, Anja et al. In: Energy Procedia Volume 63. (2014), S. 5762-5772.

Artikel › Journalartikel › 2014
First in-situ electrochemical measurement during vibration testing of injection pipe steels to determine the reliability of a saline aquifer water CCS-site in the Northern German Basin
Pfennig, Anja et al. In: Energy Procedia Volume 63. (2014), S. 5762-5772.

Artikel › Journalartikel › 2014
In-situ Stress-Strain Testing of Steels in CO2-Containing Saline Solutions
Pfennig, Anja et al. In: Machines, Technologies, Materials, International virtual journal. Varna, Bulgarien: 2014, S. 23-25.

Konferenzbeitrag › Konferenzpaper › 2014
Werkstoffcharakterisierung für Implantattechnologie in in-situ Ermüdungsversuchen
Pfennig, Anja et al. In: Gesundheit. Vielfältige Lösungen aus Technik und Wirtschaft. Beiträge und Positionen 2014, Schriften der Hochschule für Technik und Wirtschaft Berlin. Berlin: 2014, S. 160-165.

Sammelbandbeitrag › Aufsatz › 2014
Abiotic and Microbially induced Corrosion on buried Iron Artifacts
Lewicka, Domenika Luiza; Pfennig, Anja. In: Structural Studies, Repairs and Maintenance of Heritage Architecture XIII. Southampton, UK: 2013, S. 379-388.

Sammelbandbeitrag › Aufsatz › 2013
Corrosion and corrosion fatigue of AISI 420C (X46Cr13) at 60 °C
Pfennig, Anja et al. In: Corrosion Science 68 , 1. (2013), S. 134–143.

Artikel › Journalartikel › 2013
Corrosion Behavior of Steels for CO2-Injection
Yevtushenko, Oleksandra et al. In: Process Safety and Environmental Protection Volume 92, Issue 1. (2013), S. 108-118.

Artikel › Journalartikel › 2013
Corrosion Fatigue Behavior and S-N-curve of X46Cr13 exposed to CCS-environment obtained from laboratory in-situ-experiments
Pfennig, Anja et al. In: Energy Procedia Volume 37, GHGT 11. (2013), S. 5764–5772.

Artikel › Journalartikel › 2013
Energy and Carbon Footprint of Camping Stoves
Pfennig, Anja. In: 5. International Materials Educational Symposium. Cambridge, UK: 2013, S. A5.

Konferenzbeitrag › Konferenzpaper › 2013
Influence of CCS-environment on the reliability of pipe steels
Pfennig, Anja; Kranzmann, Axel. In: Machines, Technologies, Materials 2013. Varna, Bulgarien: 2013, S. 28-32.

Konferenzbeitrag › Konferenzpaper › 2013
Influence of heat treatment on the corrosion behaviour of stainless steels during CO2-sequestration into saline aquifer
Pfennig, Anja et al. In: International Journal of Green House Gas Control 15, 1. (2013), S. 213-224.

Artikel › Journalartikel › 2013
Influence of Pressure, CO2 and Chromium-content of Injection Pipe Steels on the Reliability of a Saline Aquifer Water CCS-site in the Northern German Basin
Pfennig, Anja et al. In: Energy Procedia Volume 37, GHGT 11. (2013), S. 5754–5763.

Artikel › Journalartikel › 2013
Long term corrosion behavior of heat treated pipe steels used in CO2-saturated saline aquifer CCS-environment (100 bar and 60 °C)
Pfennig, Anja et al. In: 2. International Conference on Materials for Energy. Frankfurt/Main: 2013, S. 3.

Konferenzbeitrag › Konferenzpaper › 2013
Predicting corrosion fatigue of steels in geothermal environment from new laboratory in-situ measurement technique
Pfennig, Anja et al. In: 2. International Conference on Materials for Energy. Frankfurt/Main: 2013, S. 3.

Konferenzbeitrag › Konferenzpaper › 2013
Supercritical CO2-corrosion in heat treated steel pipes during carbon capture and storage CCS
Pfennig, Anja et al. In: Clean Energy Systems in the Subsurface: Production, Storage and Conversion, Proceedings of the 3. Sino-German Conference Underground Storage of CO2 and Energy. Berlin, Heidelberg: 2013, S. 39-51.

Konferenzbeitrag › Konferenzpaper › 2013
Supercritical CO2-corrosion of steels in CCS environment
Pfennig, Anja et al. In: Energy Technology 2013: Carbon Dioxide Management and Other TechnologiesTechnologies 1. San Antonio, Texas, USA: 2013, S. 31-38.

Konferenzbeitrag › Konferenzpaper › 2013
Vibration Tests for Determination of Mechanical Behavior in CO2-Containing Solutions
Pfennig, Anja et al. In: Proceedings of EuroCorr 2013 European Corrosion Congress. Lissabon. Portugal: 2013, S. 8.

Konferenzbeitrag › Konferenzpaper › 2013
Abiotic and Microbially induced Corrosion on buried Iron Artifacts
Lewicka, Dominica L.; Pfennig, Anja. In: EuroCorr 2012 Proceedings. Istanbul, Turkey: 2012, S. 8.

Konferenzbeitrag › Konferenzpaper › 2012
Corrosion and corrosion fatigue of AISI 420C (X46Cr13) at 60 °C in CO2-saturated artificial geothermal brine
Pfennig, Anja et al. In: Corrosion Science . (2012), S. 1-11.

Artikel › Journalartikel › 2012
Corrosion behaviour of Cr13 steel in CO2 saturated brine with high chloride concentration
Yevtushenko, Oleksandra et al. In: Materials and Corrosion 63, 1. (2012), S. 517-524.

Artikel › Journalartikel › 2012
Corrosion fatigue behavior and S-N-curve of AISI 420 exposed to CCS-environment obtained from laboratory in-situ-experiments
Pfennig, Anja et al. In: Energy Procedia . (2012), S. 8.

Artikel › Journalartikel › 2012
Corrosion fatigue of X46Cr13 at 60 °C exposed to CO2-saturated geothermal brine
Pfennig, Anja et al. In: EuroCorr 2012 Proceedings. Istanbul, Turkey: 2012, S. 10.

Konferenzbeitrag › Konferenzpaper › 2012
Determining Corrosion Behavior of Steels from Experiments in CCS-Conditions
Pfennig, Anja et al. In: Machines, Technologies, Materials 2012. Varna, Bulgaria: 2012, S. 4.

Konferenzbeitrag › Konferenzpaper › 2012
Effect of CO2 and pressure on the stability of steels with different amounts of Chromium in saline water
Pfennig, Anja; Kranzmann, Axel. In: Corrosion Science 65. (2012), S. 441–452.

Artikel › Journalartikel › 2012
Influence of heat treatment on the corrosion behaviour of stainless steels exposed to CO2-saturated saline aquifer water
Pfennig, Anja et al. In: EuroCorr 2012 Proceedings. Istanbul, Turkey: 2012, S. 12.

Konferenzbeitrag › Konferenzpaper › 2012
Influence of heat treatment on the corrosion of steels in CCS environment
A. Pfennig, et al. In: TMS 2012, The 141st annual meeting & exhibition. Warrendale, PA 15086-7514 USA : 2012, S. 8.

Konferenzbeitrag › Konferenzpaper › 2012
Influence of pressure, CO2 and chromium-content of injection pipe steels on the reliability of a saline aquifer water CCS-site in the Northern German Basin
Pfennig, Anja et al. In: Energy Procedia . (2012), S. 8.

Artikel › Journalartikel › 2012
Installation einer Korrosionskammer zur In-Situ-Ermittlung des Schwingungsrisskorrosionsverhaltens von X46Cr13 in der Geothermie
Pfennig, Anja et al. In: Neue Energien. Beiträge und Positionen 2012. Berlin: 2012, S. 120-127.

Sammelbandbeitrag › Aufsatz › 2012
Introduction of material science from applied university to 6th grade elementary school
Pfennig, Anja et al. In: ELAN e.V. conference on teaching trends - Neue Konzepte des Technologie-Einsatzes in der Hochschullehre. Osnabrück: 2012, S. 1.

Konferenzbeitrag › Konferenzpaper › 2012
New in-situ Measurement Technique to Determine Corrosion Fatigue in Components and Pipes under Cyclic Load
Anja Pfennig, et al. In: MWWD and IEMES 2012, 7th International Conference on Marine Waste Water Discharges and Coastal Environment. Istanbul, Turkey: 2012, S. 10.

Konferenzbeitrag › Konferenzpaper › 2012
Predicting the life time of steels in CCS environment from long term local corrosion experiments
Pfennig, Anja et al. In: Air Pollution XX. Ashurst Lodge, Ashurst, Southampton, UK: 2012, S. 411 - 421.

Sammelbandbeitrag › Aufsatz › 2012
Supercritical CO2-corrosion in heat treated pipe steels during carbon capture and storage CCS
Pfennig, Anja et al. In: SUSTAINABLE FUTURE ENERGY 2012 and 10th SEE FORUM, Innovations for Sustainable and Secure Energy. Bandar Seri Begawan, Negara Brunei Darussalam: 2012, S. 8.

Konferenzbeitrag › Konferenzpaper › 2012
Supercritical CO2-Corrosion in Pipe Steels during Carbon Capture and Storage (CCS)
Pfennig, Anja et al. In: 4th International 'Conference on Sustainable Energy and Environment (2011). Bangkok, Thailand: 2012, S. F001.

Konferenzbeitrag › Konferenzpaper › 2012
CO2-Corrosion of Steels Exposed to Saline Water Environment
Pfennig, Anja et al. In: TMS 2011 140th Annual Meeting and Exhibition, Supplemental Proceedings, Volume 4, General Paper Selections. USA: 2011, S. 560.

Konferenzbeitrag › Konferenzpaper › 2011
Corrosion behaviour of pipe steels exposed for 2 years to CO2-saturated saline aquifer environment similar to the CCS-site Ketzin, Germany
Pfennig, Anja et al. In: Energy Procedia 4. (2011), S. 5122-5129.

Artikel › Journalartikel › 2011
CORROSION BEHAVIOUR OF STEELS IN A SALINE AQUIFER BOREHOLE
Pfennig, Anja et al. In: Efficient Carbon Capture for Coal Power Plants. Frankfurt am Main: 2011, S. 7.

Konferenzbeitrag › Konferenzpaper › 2011
CORROSION IN PIPE STEELS EXPOSED TO SUPERCRITICAL CO2 DURING CARBON CAPTURE AND STORAGE CCS
Pfennig, Anja et al. In: EuroCorr 2011 "Developing Solutions for the Global Challenge". Frankfurt am Main: 2011, S. 13.

Konferenzbeitrag › Konferenzpaper › 2011
Effect of Heat Treatment of Injection Pipe Steels on the Formation of Local Corrosion in CCS-environment
Pfennig, Anja et al. In: Oxyfuel Combustion Conference OCC II. Washington: 2011, S. 3.

Konferenzbeitrag › Konferenzpaper › 2011
First experience with lectures on “Materials and Environment”
Pfennig, Anja. In: 3rd Cambridge Symposium and short courses. Cambridge, UK: 2011, S. 50.

Konferenzbeitrag › Konferenzpaper › 2011
Influence of heat treatment on the corrosion behavior of steels exposed to CCS environment
Pfennig, Anja et al. In: Energy and Sustainability III 2011. Ashurst Lodge, Ashurst, Southampton SO40 7AA, UK: 2011, S. 487-498.

Sammelbandbeitrag › Aufsatz › 2011
Innotech 02/2011_HTW-Berlin, Forschen mit KMU
Sulzbacher, B. et al. Berlin: 2011.
Forschungs- / Abschlussbericht › 2011
Integrity of Casing and Injection Pipe Steels during CCS
Pfennig, Anja et al.

Webseiten / Blog / Forum › 2011
Reliability of pipe steels with different amounts of C and Cr
Kranzmann, Axel; Pfennig, Anja. In: International Journal of Green House Gas Control Volume 5, Issue 4. (2011), S. 757-769 .

Artikel › Journalartikel › 2011
STATIC AND DYNAMIC LONG TERM CORROSION EXPERIMENTS IN CCS-CONDITIONS
Pfennig, Anja; Kranzmann, Axel. In: EUROCORR 2011 "Developing Solutions for the Global Challenge". Frankfurt/Main: 2011, S. 8.

Konferenzbeitrag › Konferenzpaper › 2011
Supercritical CO2-Corrosion in Pipe Steels during Carbon Capture and Storage (CCS)
Pfennig, Anja et al. In: 3rd International Congress on Green Process Engineering. Kuala Lumpur: 2011, S. 6.

Konferenzbeitrag › Konferenzpaper › 2011
Werkstoffe für die Einspeisung und den Transport
Pfennig, Anja. In: CCS-Technologie – Werkstofffragen Prozesstechnisch lösen. Frankfurt am Main: 2011, S. 31.

Konferenzbeitrag › Konferenzpaper › 2011
Carbon capture and storage technique (CCS): Reliability of pipe steels used in Ketzin, Germany verified in laboratory saline aquifer corrosion experiments
Pfennig, Anja et al. In: MWWD & IEMES 2010 Langkawi, Malaysia October 25-29. Istanbul: 2010, S. 12.

Konferenzbeitrag › Konferenzpaper › 2010
Corrosion behaviour of pipe steels exposed for 2 years to CO2-saturated saline aquifer environment similar to the CCS-site Ketzin, Germany
Pfennig, Anja et al. In: Tagungsband. Amsterdam: 2010.

Konferenzbeitrag › Konferenzpaper › 2010
Corrosion phenomena related to CCS (Carbon Capture and Storage)
Pfennig, Anja et al. In: BAM Wissensbörse 2010. Berlin: 2010, S. 1.

Konferenzbeitrag › Konferenzpaper › 2010
Integrity of casing and injection pipe steels during Carbon Capture and Storage CCS
Pfennig, Anja; Kranzmann, Axel. In: Innovation for Sustainable Production. Brugge, Belgium: 2010, S. 5.

Konferenzbeitrag › Konferenzpaper › 2010
Korrosionsschutz für den Klimaschutz / Corrosion Protection for Climate Protection
Heiman, Gideon et al. In: Jahresbericht 2009/ Annual Report 2009. Alfter/Bonn: 2010, S. 84-89.

Sammelbandbeitrag › Aufsatz › 2010
Predicting the long term corrosion behaviour of pipe steels used at the CCS-site Ketzin, Germany in laboratory CO2-saturated saline aquifer CCS-environment
Pfennig, Anja et al. In: First International Conference on Materials for Energy. Frankfurt am Main: 2010, S. 1005-1007.

Konferenzbeitrag › Konferenzpaper › 2010
Preparing new lectures on "materials and environment"
Pfennig, Anja. In: Symposium on CES material selection. Cambridge, UK: 2010, S. 1.

Konferenzbeitrag › Konferenzpaper › 2010
Reliability of Steels during Injecting of CO2 into Saline Aquifer
Pfennig, Anja et al.

Webseiten / Blog / Forum › 2010
The role of pit corrosion in engineering the carbon storage site Ketzin, Germany
Pfennig, Anja; Kranzmann, Axel. In: Air Pollution. Southhampton, England: 2010, S. 109 - 120.

Sammelbandbeitrag › Aufsatz › 2010
Effect of CO2 on the stability of steels with 1% and 13% Cr in saline water
Pfennig, Anja; Bäßler, Ralph. In: Corrosion Science, The Journal on Environmental Degradation of Materials and its Control 51, 4. (2009), S. 931-940.

Artikel › Journalartikel › 2009
Effects of saline aquifere water on the corrosion behaviour of injection pipe steels 1.4034 and 1.7225 during exposure to CO2 environment
Pfennig, Anja; Kranzmann, Axel. In: Energy Procedia Volume 1, Issue 1. (2009), S. 3023-3029.

Artikel › Journalartikel › 2009
Influence of CO2 on the corrosion behaviour of 13Cr martensitic stainless steel AISI 420 and low alloyed steel AISI 4140 exposed to saline aquifer water environment
Pfennig, Anja; Kranzmann, Axel. In: Air Pollution XVII. Wessex: 2009, S. 409 - 418.

Sammelbandbeitrag › Aufsatz › 2009
Integrity of the borehole during Carbon Capture and Storage CCS
Pfennig, Anja. In: CES EduPack Symposium and Courses. Cambridge: 2009, S. 1.

Konferenzbeitrag › Konferenzpaper › 2009
Phase formation on typical pipe steels in CCS-technology
Pfennig, Anja et al. In: Hallesches Jahrbuch für Geowissenschaften, 87. Tagung der DMG. Halle, Germany: 2009, S. 1.

Konferenzbeitrag › Konferenzpaper › 2009
Reliability of Pipe Steels 42CrMo-4 and X46Cr13 during Onshore Carbon Dioxid Injection
Pfennig, Anja; Kranzmann, Axel. In: IOP Conf. Ser. Earth Environ. Sci. 6 172023, (Climate Change, Risks, Challenges & Decisions). Copenhagen: 2009, S. (CD).

Konferenzbeitrag › Konferenzpaper › 2009
Reliability of Steels during Injecting of CO2 into Saline Aquifer
Pfennig, Anja et al. In: 1st Oxyfuel Combustion Conference. Cheltenham, Gloucestershire: 2009, S. 1.

Konferenzbeitrag › Konferenzpaper › 2009
Effect of CO2 on the stability of steels with 1% and 13% Cr in saline water
Pfennig, Anja; Kranzmann, Axel. In: Water, Steam and Aqueous Solutions. Advances in Science and Technology for Power Generation Proceedings of the 15th International Conference on the Properties of Water and Steam. Berlin: 2008, S. 12.

Konferenzbeitrag › Konferenzpaper › 2008
Effects of Saline Aquifere Water on the Corrosion Behaviour of Injection Pipe Steels 1.4034 and 1.7225 during Exposure to CO2 Environment
Pfennig, Anja; Kranzmann, Axel. In: Energy Proceedia. Cambridge: 2008, S. 10.

Konferenzbeitrag › Konferenzpaper › 2008
Influence of CO2 on the corrosion behaviour of 13Cr martensitic stainless steel AISI 420 and low alloyed steel AISI 4140 exposed to saline aquifer water environment
Pfennig, Anja; Kranzmann, Axel. In: ICENV Proceedings. Malaysia: 2008, S. 8.

Konferenzbeitrag › Konferenzpaper › 2008
Isothermal Oxidation Behaviour and Microstructure of the single crystal superalloy PWA 1483
Pfennig, Anja; Kranzmann, Axel. In: 1st EUCOMAS. Berlin: 2008, S. 2, 391-392.

Konferenzbeitrag › Konferenzpaper › 2008
Oxidation of a single crystal Nickel-Base Superalloy at 950 °C
Pfennig, Anja et al. In: Corrosion - Journal of Science and Engineering z.Z. 22, manuscript # 18417. (2008), S. 8.

Artikel › Journalartikel › 2008
Oxidation of a single crystal Nickel-Base Superalloy at 950 °C – a kinetic and microstructure study
Pfennig, Anja; Fedelich, Bernard. In: NACE Corrosion Conference & Expo 2008. New Orleans: 2008, S. 9.

Konferenzbeitrag › Konferenzpaper › 2008
Oxidation of single crystal PWA 1483 at 950 °C in flowing air
Pfennig, Anja; Fedelich, Bernard. In: Corrosion Science Vol. 50, Issue 9 (September 2008). (2008), S. 2484-2492.

Artikel › Journalartikel › 2008
Simulation of crack growth under low cycle fatigue at high temperature in a single crystal superalloy
Kiyak, Y. et al. In: Engineering Fracture Mechanics Vol. 75, Issue 8, May 2008. (2008), S. 25, 2418-2443.

Artikel › Journalartikel › 2008
An analysis of high temperature crack growth in a single crystal superalloy under Low Cycle Fatigue Loading
May, T., et al. In: 5th German-Japan Seminar “Materials, Processes and Components” . Fraunhofer Institute for Mechanics of Materials / Freiberg / Germany: 2007, S. 14.

Konferenzbeitrag › Konferenzpaper › 2007
Experimental characterization and modelling of high temperature crack growth in a single crystal superalloy under Low Cycle Fatigue Loading
Fedelich, B., et al. Paris: 2007.
Arbeits- / Diskussionspapier › 2007
Influence of the total pressure and the CO2 partial-pressure on the oxidation of high temperature steels and the aqueous corrosion of steels used in CCS technology
Pfennig, Anja. Essen: 2007.
Forschungs- / Abschlussbericht › 2007
Influence of the total pressure and the water partial pressure on the oxidation of high temperature steels
Pfennig, Anja. Berlin: 2006.
Forschungs- / Abschlussbericht › 2006
Simulation of crack growth under low cycle fatigue at high temperature in a single crystal superalloy
Fedelich, B., et al. In: Fracture of Nano and Engineering Materials and Structures. Alexandroupolis, Greece: 2006, S. 8.

Konferenzbeitrag › Konferenzpaper › 2006
Mikrostruktur und Eigenschaften keramischer Formmassen im FeingussMicrostructure and properties of ceramic mould materials for investment casting
Pfennig, Anja. Erlangen-Nürnberg: 2001.
Forschungs- / Abschlussbericht › 2001
Electrical Properties of Mg~K0.83~LFe~K0.17~L0 in a Gas Mixing Furnace and the Diamond Anvil Cell
Roberts, J. et al. In: AGU Fall meeting. San Fransicso, USA: 1995, S. 8.

Konferenzbeitrag › Konferenzpaper › 1995

Kontakt

Prof. Dr.-Ing. Anja Pfennig

Rufnummer: +49 30 5019-4231

Anja.Pfennig@HTW-Berlin.de

Campus Wilhelminenhof

WH Gebäude C, 108

Wilhelminenhofstraße 75A

12459 Berlin

Hochschule für Technik und Wirtschaft Berlin

University of Applied Sciences

Publikationen von Prof. Dr.-Ing. Anja Pfennig

Themen

Informationen für

Über die HTW Berlin

Beliebte Seiten

Portale

Service